Harry Nettleton’s 1907 RaCycle Pace Maker

1907 RaCycle

There are a lot of names here so lets see… This is the Pace Maker model RaCycle, and RaCycles were made by the Miami Cycle and Manufacturing company of Middleton, Ohio.

Bikes like this one followed high-wheelers onto the cobbled streets of early 1900’s America.  With newly invented roller chain and pneumatic tires, this would have been a luxuriously smooth ride compared to a Penny-Farthing.

One of the selling points of the Pace Maker was the massive front chainring (equivalent to a modern 84-tooth ring) that was meant to attract attention and suggest higher speed (but the big ring was actually offset by a big back cog that ended up producing a comfortable gear ratio).

The new air-filled tires were mounted (using shellac as glue) to wooden rims (maple, I think).

Head badge

Adjustable handlebar

Oversized drivetrain

Fork pegs

42 skip-tooth chainring

A RaSaddle?

The handlebars on the Pace Maker are really cool.  They pivot at the stem, and can be adjusted in width and height, depending on a rider’s desire.

Foot pegs on the front fork allowed the rider to enjoy speeding downhill on his fixed-gear bike.  Sure, without your feet on the pedals to control the speed there would be no brakes, but brakes are overrated.

Racycle advertisement

Check out the old ad that we found for RaCycle bikes.  The copy in old advertising and press releases like this one was so earnest.   According to the manufacturer, a 1904 Worlds Fair jury “consisting of the ablest consulting and manufacturing engineers in Europe and America, were unanimous in their decision that the Racycle was the most perfectly constructed, easiest running bicycle in the world.”

However they were judged, early “safety” bicycles like this one really brought inexpensive personal transportation to the masses.  They connected people with jobs and schools, connected rural areas of the country with cities, connected extended families (and liberated family members from one another).

This bike was originally owned by Harry Nettleton of Red Wing, Minnesota.  Harry raised the original $16.50 purchase price by collecting clam shells from the Minnesota river and selling them to a local button factory.

By the way, if you take a look at the Iver Johnson Truss-bridge bike from the same era, you’ll note that the RaCycle was about a third of the price of the Iver Johnson.

Vincent Seiferd, Sr

By |2016-08-26T02:45:59+00:00May 10th, 2016|museum people|

Vincent Seiferd, Sr. 1914-1992 Vincent Seiferd, The Swedish Ace Vincent Seiferd was our kind of guy. Vincent raced his bike for [...]

Read More
Comments Off on Vincent Seiferd, Sr

Kiel Reijnen

By |2020-01-14T17:47:24+00:00October 29th, 2015|museum people|

Kiel Reijnen Kiel at the US Pro Challenge Knowing the players makes big league sports so much fun... Kiel Reijnen was [...]

Read More
Comments Off on Kiel Reijnen

Lance Armstrong

By |2015-05-04T22:58:26+00:00May 4th, 2014|museum people|

Lance Armstrong One of Lance Armstrong's 2001 Tour de France Yellow Jerseys Like it or not, Lance Armstrong is a big [...]

Read More
Comments Off on Lance Armstrong

Jay Inslee

By |2013-11-02T19:34:36+00:00November 2nd, 2013|museum people|

Washington Governor Jay Inslee Washington Governor Jay Inslee and his bike Not a bike racer or a bike builder, but a [...]

Read More
 0

Charley Bergna

By |2020-01-14T17:47:36+00:00December 16th, 2012|museum people|

Charley Bergna On his Schwinn Paramount 1937 amateur cycling national champion A champion cyclist, and a champion for cycling. [...]

Read More
Comments Off on Charley Bergna

Frank Turano

By |2012-12-07T20:05:43+00:00December 7th, 2012|museum people|

Frank Turano Frank Turano understood better than anyone that an athlete's job is to be an entertainer. During the decades of [...]

Read More
 0
 
1-206-842-9191 | TUE-SAT 10-5 | SUN 12-4 | CLOSED MONDAYS
© 2024 Classic Cycle Bainbridge Island Kitsap County
Go to Top